Atlus Remote Instructions

Step 1

Initiate programming by pressing both the Up and Down buttons at the same time until the motor Jogs.

NOTE: After every command the motor will jog to confirm.

Step 2

Check the directions by pressing the Up or Down buttons (the motor will work in momentary function). To change the direction press and hold the Stop button until the motor jogs.

Step 3

Bring the motor to your desired upper limit. Now press both the Stop and Down buttons until the motor moves, then release. Stop the motor where the lower limit should be set, you can adjust by pressing the Up or Down buttons.

To Adjust Limits

To change the lower limit: Move the motor to its current lower limit position and let it stop. Press the Up and Down buttons simultaneously until the motor jogs, then release. Adjust to a new lower limit position. Press the Stop button until the motor jogs, then release. Check new limit.

To change the upper limit: Move the motor to its current upper limit position and let it stop. Press the Up and Down buttons simultaneously until the motor jogs, then release. Adjust to a new upper limit position. Press the Stop button until the motor jogs, then release. Check new limit.

Note

After every command the motor will jog to confirm. Please contact SOMFY for detailed installation instructions.

Step 4

Press and hold the Stop and Up buttons until the motor moves up, the motor will stop at the original upper limit point, adjust if necessary.

Step 5

Press and hold the Stop button until the motor jogs to confirm the limit setting.

Step 6

Press and hold the Program button on the back of the transmitter until the motor jogs. It will now operate in a maintained function. Double check limits as a precaution.